Choose your language


This website content is also available in COUNTRY TO CHANGE.

Amorim Expandacork

Absorbing expansions and the contractions inherent to concrete buildings

Designed to fill the gaps left between concrete slabs, Amorim Expandacork products absorb the vibrations, expansions and contractions caused by thermal variations in different construction systems. The joint fillers allow the movement of structures without causing damage and ensuring these spaced are filled.

Amorim Expandacork's unique flexibility enables its easy deployment and also its capacity to resist without any deterioration the continuous deformations caused by different climate conditions. Amorim Expandacork materials correspond to a long term compromise between performance, durability and mechanical resistance required on the high end projects of the construction industry.

Amorim Expandacork's key features

Tecnhical Specifications

  Amorim Expandacork
Type II
Amorim Expandacork
Type III
Compression 50% of initial thickness with a load of between 0.35 MPa and 10.35MPa (50 to 1500 PSI)
Recovery =/> 90% of original thickness after 50% compression
Extrusion There is a maximum extrusion level beyond the joint of 6.35mm (1/4'') when subject to 50% compression
Resistance to HCI Submerged into boiling HCI, Expandacork does not desintegrate
Expansion n.a. Submerged into boiling water for the period of one hour, Expandacork self-expanding cork type III expands by less than 40% of its original thickeness
Dimensional Variation n.a. Expandacork self-expanding cork type III does not display any sign of degradation even after the simulation of ten cycles of ageing and continues to complete seal the joint
Storage Expandacork should be conserved on its original packaging and in a dry place through its application
Density (kg/m3) 120 - 180 (7.50 - 11.24 lb/ft3) 250 - 370 (15.60 - 23.10 lb/ft3)
Sheet size (mm) 915 x 610 (36x24 in) 915 x 610 (36x24 in)
Thickness (mm) 10; 15; 20; 25; 30; 40; 50 * 10; 15; 20; 25; 30; 40; 50 *

* Standart thickness dimension - available in other thickness upon request

Note: Expandacork should be conserved in its original packaging, in a dry place and on a level surface throughout its application; Expandacork Types II and III comply with ASTM 1752 & ASTM D 545

The data provided in this table represents typical values. This information is not intended to be used as a purchasing specification and does not imply suitability for use in a specific application. Failure to select the proper product may result in either equipments damage or personal injury. Please contact us regarding specific application recommendations. Amorim Cork Composites expressly disclaims all warranties, including any implied warranties or merchantability or of fitness for a particular purpose. Amorim Cork Composites is not liable for any indirect special, incidental, consequential, or punitive damages as a result of using the information listed in this tabl. Any of its material specification sheets, its products or any future use or re-use of them by any person or entity.

Explore projects with Amorim Expandacork

Qatar Foundation Headquarters

Expandacork - Type II.

Read More

Doha Metro Green Line Underground (Qatar)

Expandacork - Type II.

Read More

New Orbital Highway and Truck Route (Qatar)

Expandacork - Type II.

Read More



Would you like to know more about this subject?

Let us know your details and we'll get back to you.