
Power Equipment and Accessories Seals and Gaskets
Performance-driven and recognized worldwide.
Fastener Isolation Accessories
Untreated connections often result in vibration flanking paths, propagating vibration throughout the structure through the bolt to the surrounding area resulting in structural borne noise.
Amorim VC collars & washers should be used in any system that requires treatment due to rigid fastener connections such as bolted vibration pads or fan connection assemblies. The 3mm collar wall and 4mm washer thickness are made of VC1047 vibration control elastomer and designed to withstand the presence of oils and fuels to guarantee a long lasting decoupling of the rigid connection under adverse conditions.
Bolt Size | Isolation Collars | Washers |
---|---|---|
M10 | ID 10mm OD 16mm | ID 10mm OD 30mm |
M12 | ID 12mm OD 18mm | ID 12mm OD 36mm |
M14 | ID 14mm OD 20mm | ID 14mm OD 42mm |
M16 | ID 16mm OD 22mm | ID 16mm OD 48mm |
M18 | ID 18mm OD 24mm | ID 18mm OD 54mm |
M20 | ID 20mm OD 26mm | ID 20mm OD 60mm |
M24 | ID 24mm OD 30mm | ID 24mm OD 72mm |
M26 | ID 26mm OD 32mm | ID 26mm OD 78mm |
The data provided in this table represents typical values. This information is not intended to be used as a purchasing specification and does not imply suitability for use in a specific application. Failure to select the proper product may result in either equipments damage or personal injury. Please contact us regarding specific application recommendations. Amorim Cork Composites expressly disclaims all warranties, including any implied warranties or merchantability or of fitness for a particular purpose. Amorim Cork Composites is not liable for any indirect special, incidental, consequential, or punitive damages as a result of using the information listed in this tabl. Any of its material specification sheets, its products or any future use or re-use of them by any person or entity.
Performance-driven and recognized worldwide.
Noise reduction in transformers & reactors through decoupling and isolation.
Crack prevention in resin impregnated bushings.