Techseal - Multipurpose Seals and Gaskets
Soft Gasket Material Technology.
Unique blends of cork and select rubbers produce materials indicated for soft gaskets sealing, that due to reduced side flow, allow for larger contact areas and higher compression ratios which guarantee an effective sealing barrier against potential flange surface imperfections, distortions and leakage paths.
In stamped steel or lightweight assemblies Accoseal sponge grade materials are especially useful, being able to compress with minor fastener loading and minimum hardware distortion allowing for an overall optimized system design. Its controlled side flow allows for groove assembling without the need for allowance on the contrary to its incompressible counterparts such as rubber.
Accoseal® products have extensive characterization against automotive application mediums such as fuel, lubricants and coolants. Dedicated grades are UL listed such as NC710, NC711 and NC711G under the UL157 category for fuel. Especially our Epichlorihydrin grade NC711G has been extensively tested in biodiesel and bioethanol fuel blends to various concentrations with remarkable results.
400psi / 28 Kg/cm2
|Characteristics and Uses||Certifications|
|DC100||Sheets / Rolls||25 - 45||General-purpose gasket and sealing material; high cork content, minimum side flow.|
|DC179||Sheets||35-50||Highly compressible material for low bolting pressures|
|DC205||Sheets / Rolls||15 -30 / 25-45||Economical, highly compressible material for low bolting pressures.|
|LC800||Sheets||10 -30||Outstanding flexibility and resilience over wide range of temperatures. Excellent for coolant use.|
|NC709||Sheets||30 - 50||Soft, highly compressible for low bolting pressures; oil and solvent resistance.|
|NC710||Sheets / Rolls||75 / 70||Medium compressibility, with maximum oil and solvent resistance||UL listed|
|NC711||Sheets / Rolls||10 - 25 / 15 - 30||Low compressibility, with maximum resistance to oils and solvents||UL listed|
|NC733||Sheets||10 - 30||Performs in a wide range of wet or dry friction applications, operating successfully on jobs ranging from printer drives to heavy-duty transmissions in tractors and road graders.|
|NL76||Sheets||30 - 45 @7kg/cm2||Highly compressible, resists fatigue; for cushion pads,low sealing stress requirements.|
|NC711G||Rolls||15 - 30||High quality, low compressibility with excellent chemical resistance to all fuel types UL listed||UL listed|
The data provided in this table represents typical values. This information is not intended to be used as a purchasing specification and does not imply suitability for use in a specific application. Failure to select the proper product may result in either equipments damage or personal injury. Please contact us regarding specific application recommendations. Amorim Cork Composites expressly disclaims all warranties, including any implied warranties or merchantability or of fitness for a particular purpose. Amorim Cork Composites is not liable for any indirect special, incidental, consequential, or punitive damages as a result of using the information listed in this table. Any of its material specification sheets, its products or any future use or re-use of them by any person or entity.
Soft Gasket Material Technology.
Our commitment to support industry partners and improve their products by continually offering new material solutions, has culminated in a broad range of products with specific features tailored to the requirements of multiple industries and applications.