Accoseal
Reliable and Market Renowned Sealing Material Brand
Unique features make it the preferred material used across multiple applications in automotive sealing.
Techseal is a range of engineered sealing materials based on soft gasket technology, specifically designed and tested to withstand application environments in automotive sealing, while providing cost effective final product customization and manufacturing options.
Unique blends of cork and select rubbers produce materials indicated for soft gaskets sealing, that due to reduced side flow, allow for larger contact areas and higher compression ratios which guarantee an effective sealing barrier against potential flange surface imperfections, distortions, and leakage paths.
Extensive material testing and application evaluation continues to drive the development of unique materials and solutions in this product family, while maintaining its recognition and track record in powertrain and non-powertrain applications such as oil pans, valve covers, radiators, automatic transmissions, axle covers, timing covers, and wiper systems.
-
Load to Seal
TechSeal® products require a low load to seal stress which means that economical hardware designs can be used instead of structured and tight tolerance surface finishes. A lower load to seal leads to hardware gains such as optimized hardware designs including lower grade or smaller size fasteners, resulting in lower torques which also benefit lower distortion issues and safer fastener working ranges.
-
3D Gasket Materials
For specific hardware designs, we also provide the possibility of 3D cork rubber gasket materials developed and used for injection and transfer molding. These innovative materials have been used in heavy duty applications for heat resistance and chemical compatibility depending on the environment, whilst maintaining the distinctive behavior under compression induced by the cork in the polymer blend that cannot be attained through conventional rubber O-rings.
Interested in automotive materials?
Get in touch with us so we can help you
Downloads
Techseal Product Range
Units
| Grade | Material Description | Density (kg/m³) |
Durometer (pts) Shore A |
Compressibility (pts) (400 psi) |
Tile strength (Mpa) |
|---|---|---|---|---|---|
| TS1028 | Cork/SBR blend, with outstanding low sealing stress for low loading applications. Suitable for most lubrication fluids | 43–56/700–900 | 65* | 25–40 | 145/1,0 |
| TS1400 | Cork/nitrile blend, high performance, high loading material, suitable for fuels, bio-fuels, oils and coolants | 69*/1100* | 75–90 | 10–22 | 508/3,5 |
| TS1521 | Cork/SBR blend, with outstanding low sealing stress for low loading applications. Suitable for most lubrication fluids | 35–47/550–750 | 50 - 70 | 35 - 50 | 116/0,8 |
| TS1800 | Cork/Nitrile blend, with medium loading material. Suitable for fuels, bio-fuels, oils and coolants | 52–65/832–1088 | 65 - 86 | 15–30 | 246/1,7 |
| TS56001 | Cork/SBR blend, medium loading material. Suitable for most lubrication fluids. | >45/>720 | 70* | 20–40 | 145/1,0 |
| TS71101 | Cork/Epichlorohydrin blend, medium to high loading material, expectionally suited for fuels, bio-fuels, as well as oils and coolants. | 1000 - 1250 | 70 - 85 | 15 - 30 | 2,0 |
| TS7000 | Cork/Silicone blend, medium loading material used for very high and low temperature resistance, exceptional resistance to coolants and acceptable resistance to most lubricants. | 69*/1100* | 65–80 | 10–30 | 247/1,7 |
| TS7090 | Cork/NBR blend, medium low loading material used for natural gas and LPG applications. | 41*/650* | 50–70 | 30–50 | 290/2,0 |
| TS7100 | Cork/Nitrile blend, medium loading material, suitable for fuels, bio-fuels, and oils. | 56*/900* | 60-75 | 20–45 | 362*/2,5* |
| TS7110 | Cork/Epichlorohydrin blend, medium to high loading material, exceptionally suited for fuels, bio-fuels, as well as oils and coolants. | 69*/1100* | 70-85 | 15–30 | 653*/4,5* |
| TS7330 | Cork/Nitrile blend, high loading material, suitable for most lubricants. | 61*/980* | 70-90 | 10–30 | 435*/3,0* |
| Certifications and Approvals: (1) UL - Listed |
|||||
The data provided in this table represents typical values. This information is not intended to be used as a purchasing specification and does not imply suitability for use in a specific application. Failure to select the proper product may result in either equipments damage or personal injury. Please contact us regarding specific application recommendations. Amorim Cork Composites expressly disclaims all warranties, including any implied warranties or merchantability or of fitness for a particular purpose. Amorim Cork Composites is not liable for any indirect special, incidental, consequential, or punitive damages as a result of using the information listed in this table. Any of its material specification sheets, its products or any future use or re-use of them by any person or entity.
Related
Where We Are
:
Headquarters Rua de Meladas,
260, 4535-186 Mozelos VFR Portugal